Care and maintenance, Cleaning the air filter, Caution a – Admiral AW-05CR1FHLU User Manual

Page 16: Cleaning of air filter, End-of-season care, Air filter removal, Acaution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Care and Maintenance /

When servicing the air conditioner, be sure to

turn the power switch to the OFF position and

disconnect the power cord from the electrical
outlet.

ACAUTION

1. DO NOT use gasoline, benzine, thinner or

other chemicals on the air conditioner as these

substances may cause damage to the paint finish

and deformation of plastic parts.

2. Never attempt to pour water directly on the

front of the unit as this will cause deterioration of

the electrical insulation.

Cleaning the Air Filter

If the air filter becomes clogged with dust, air-flow
is obstructed and reduces efficiency. The air filter

should be cleaned once a month. More frequent

cleaning may be necessary depending on outdoor

and Indoor air quality.

CAUTION A

DO NOT forget to install the air fitter. If the air

conditioner is left to operate without the air filter,
dust is not removed from the room and may
cause your air conditioner to fail.
When the air filter, air inlet grille and cabinet

are dirty, wipe with lukewarm water {below 40*0),

Use of mild detergent is recommended.

Cleaning of Air Filter

1. Remove dust clogged in the filter by

tapping it or vacuum clean it.
2. Wash the filter well with lukewarm water below
40X:{104T) vs^ile rubbing tightly. To get better

results, wash it with soapy water or a neutral

cleaning agent.

3. Rinse the filter well using clean water then

dry completely.

End-of-Season Care

Air Filter Removal

The air filter on the above models Is located

behind the Air Inlet Grille.

To remove the air filter, grasp the filter handle

located on the up side of the Air Inlet Grille

and elide the air filter to the up.

To reinstall the air filter, reverse the above

procedure.

1. Operate the fan alone for half a day to dry out

the inside of the unit.
2. Turn off power and remove plug from
wall socket.

3. Clean fitter.

4. Store in a dry location.

Advertising
This manual is related to the following products: