2 features, And functions, 3 mmc – ADLINK aTCA-N700 User Manual
Page 37: Control operation
Advertising
aTCA-RN720 User's Guide
37
Cold Reset triggered by Shelf manager
Figure 7-2 Cold Reset Procedure
(s) Shelf manager sends RESET command to IPMC.
①
IPMC converts the command into Cold reset signal to FPGA.
②
FPGA sends Resets to LMP and all Devices including RTM.
③
MMC in RTM receives the Reset and forward the Reset to selected devices in the RTM.
Table 7-2 Signals: Cold Reset Procedure
Signal name
Descriptions
Cold RESET
PB(5)
Cold RESET Command
0 : Cold RESET
1 : Normal operation
RESET RESET
Command
0 : RESET
1 : Normal operation
Advertising