Table 7-6 signals: rtm activate procedure – ADLINK aTCA-N700 User Manual
Page 41
aTCA-RN720 User's Guide
41
Shutdown triggered by LMP
Power OFF
IPMC
LMP
UART#1
Power
Sequence
P5(5)
Figure 7-7 Shutdown Procedure
⒮
LMP sends Shutdown Command to IPMC via PAYLOAD Interface (UART).
①
IPMC initiates Power Down sequence to turn off Blade and RTM power.
Table 7-7 Signals: Shutdown Procedure
Signal name
Status
PAYLOAD Interface
P5(4),P5(5)
Shutdown Command
- IPMI Message
RTM Shutdown triggered by LMP
Figure 7-8 RTM Shutdown Procedure
⒮
LMP sends RTM Shutdown to IPMC via PAYLOAD Interface (UART).
①
IPMC sends RTM Power OFF to MMC via IPMB-L.
②
MMC completes RTM Power OFF operation and sends the completion message to IPMC.
③
IPMC turns off RTM Power 12V.
④
IPMC sends RTM Disable information to LMP via PAYLOAD Interface (UART).