ADLINK cPCI-3510 Series - Manual (Page 89)

Driver Installation 75
cPCI-3510
6 Driver Installation
The cPCI-3510 drivers are available from the ADLINK All-In-One
DVD at X:\cPCI\cPCI-3510\, or from the ADLINK website
(http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&
pid=1291). ADLINK provides validated drivers for Windows 7
64-bit. We recommend using these drivers to ensure compatibility.
The VxWorks BSP can be downloaded from the cPCI-3510 prod-
uct page on the ADLINK website
6.1 cPCI-3510 Drivers
The following describes the cPCI-3510 driver installation proce-
dures for Windows 7 64-bit. Install the Windows operating system
before installing any driver. Most standard I/O device drivers are
installed during Windows installation.
1. Before beginning Windows installation, save the AHCI driver to
a USB flash drive. During Windows installation, install the
AHCI driver from the USB flash drive when prompted.
2. Install the chipset driver by extracting and running the pro-
gram in ...\Chipset\Intel Chipset Device Software_
All OS_9.4.0.1017.zip.
3. Install the graphics driver and utilities by extracting and run-
ning the program in ...\Graphics\Intel® HD Graphics 4600_
Win7_64bit_9.18.10.3220.zip.
4. Install the Ethernet Controller driver by following the steps
described in "6.2 Ethernet Controller Driver” on page 76.
5. Install the Management Engine (ME) driver and utilities by
extracting and running the program in ...\Chipset\Intel
Management Engine Interface 9.0.0.1209.zip.
6. Install the TPM driver by extracting and running the program in
…\TPM\Infineon_Trusted_Platform_Module_2.1.1.0.zip.
7. Install the audio driver and utilities by extracting and running
the program in …\Audio\Realtek_High Definition Audio_
Win7_8_64_6.0.1.6873.zip.