ADLINK cPCI-6520 - Manual (Page 122)

110 Checkpoints & Beep Codes
PEI Beep Codes
DXE Phase
# of Beeps Description
1 Memory not Installed
1
Memory was installed twice (InstallPeiMemory
routine in PEI Core called twice)
2 Recovery started
3 DXEIPL was not found
3 DXE Core Firmware Volume was not found
4 Recovery failed
4 S3 Resume failed
7 Reset PPI is not available
Status Code Description
0x60 DXE Core is started
0x61 NVRAM initialization
0x62
Installation of the South Bridge Runtime
Services
0x63 CPU DXE initialization is started
0x64 CPU DXE initialization (CPU module specific)
0x65 CPU DXE initialization (CPU module specific)
0x66 CPU DXE initialization (CPU module specific)
0x67 CPU DXE initialization (CPU module specific)
0x68 PCI host bridge initialization
0x69 North Bridge DXE initialization is started
0x6A North Bridge DXE SMM initialization is started
0x6B
North Bridge DXE initialization (North Bridge
module specific)
0x6C
North Bridge DXE initialization (North Bridge
module specific)
0x6D
North Bridge DXE initialization (North Bridge
module specific)
0x6E
North Bridge DXE initialization (North Bridge
module specific)