ADLINK cPCI-6520 - Manual (Page 90)

78 BIOS Setup
8.3.5 SATA Configuration
You can use this screen to select options for the SATA Configura-
tion Settings. An example of the SATA Configuration screen is
shown below.
SATA Controller(s)
Enable or disable SATA device.
SATA Mode Selection
The SATA can be configured as a legacy IDE, RAID and AHCI
mode.
SATA Port 0~5
Display SATA device name string.
Staggered Spin-up
Appears when SATA mode is AHCI. AHCI supports staggered
spin-up. Set this value to Enabled/Disabled.