Device power-up delay, Super io configuration, Serial port 1/2/3/4 configuration – ADLINK cPCI-3971 User Manual
Page 130
Advertising
![background image](/manuals/733544/130/background.png)
116
BIOS Setup Utility
Device Power-up Delay
Maximum time the device will take before it properly reports
itself to the Host Controller. "Auto" uses these default values:
for a Root port it is 100ms, for a Hub port the delay is taken
from the Hub descriptor.
Super IO Configuration
Serial Port 1/2/3/4 Configuration
Each sub-menu allows you to Enable/Disable and set the
parameters of Serial Ports 1, 2 (Front Panel), 3 (IPMI), 4
(RTM).
Advertising