Altech UEC DSD4121RV - Manual (Page 7)

Page 6 of 22
RESTORING FACTORY DEFAULTS
Resetting to factory defaults can be useful if you have changed some settings and lost some functions.
Resetting will restore the decoder back to its original configuration and you will lose all personalized settings.
The only setting that is not reset is the LNB setting. Please manually edit this setting to the correct value.
ETHERNET
Ethernet functionality is planned for future support. New user manuals will be available on the website when
this feature is available.
SMART CARD
The smart card is paired to this decoder which means that the smart card provided with your decoder
cannot be used in any other decoder. Similarly you will not be able to use any other card in your decoder.
RESET BUTTON
There is a reset button on the front panel. This can be used to reset your decoder in the case of a video
freeze for example. The decoder will reboot after a few seconds and display “boot” on the front panel while
it starts up.
MHEG
The ability to launch MHEG applications will be supported by the DSD4121 in the future. User instructions
will be available on the website (www.uec.com.au) once this feature becomes available.
Install & Connect the DSD 4121 Decoder