Altech UEC DSD4121RV - Manual (Page 9)

Page 8 of 22
I-PLATE
The information plate (i-Plate) displays information about the current and next event at the bottom of the TV screen.
You can open the i-Plate by pressing the ”i” button on the remote. To change to a different channel carry-out the
following:
Press the “+P-” button on the remote to change the channel to the next/previous channel respectively, or
When the i-Plate is open, press the “LEFT/RIGHT” arrow buttons on the remote. This allows you to browse
the programme information of the other channels without changing the channel you are presently viewing.
You can set the timeout value for the information plate (i-Plate) from the menu.
NOTE: The i-Plate will only timeout when changing channels from the “+P-” button. If you have manually opened
the i-Plate, the “EXIT” button must be pressed to remove it.
DSD4121 DECODER FEATURES AND MENU
Decoder Features and Menu