Ambir ImageScan Pro 940u - Manual (Page 4)

Ambir ImageScan Pro
TM
940u Quick Start Guide
Installation and Setup
(Continued)
Step 3. Installing the Software
1.
Switch on the scanner power from the rear of the
scanner.
2.
If the USB components on your computer are
functioning correctly, they will automatically detect
the scanner causing the “Add New Hardware
Wizard” or “Found New Hardware Wizard” to be
launched.
3. For Windows XP:
a. Insert the Setup/Application CD-ROM, included
with your scanner, into your CD-ROM drive.
b. Select “Install the software automatically
(recommended)” and click the Next button.
c. Click the Next button in the window that appears.
Afterwards, please skip to procedure 7.
4. For Windows Vista:
a. Select “Locate and install driver software
(recommended)” when the “Found New Hardware”
window is displayed.
b. Click on the Continue button when the
“User Account Control” dialog pops up.
c. Insert the Setup/Application CD-ROM, included
with your scanner, into your CD-ROM drive when
the system prompts: “Insert the disc that came
with your USB Scanner.” Click on the Next button.
Afterwards, please skip to procedure 8.
5. For Windows 7:
a. Insert the Setup/Application CD-ROM, included
with your scanner, into your CD-ROM drive. Click
“Run install.exe” in the AutoPlay window.
b. Click on the Yes button if the User Account Control
dialog pops up. Follow the instructions in the pop-
up installation message.
c. In the Device Manager window, right click on this
scanner under “Other devices” and select “Update
Driver Software” from the pop-up menu. Click
“Browse my Computer” for driver software in the
window that appears, and click the Browse button.
d. In the Browse For Folder window, select the folder
or the CD-ROM drive that contains this scanner
driver and click the OK button to return to the
previous screen. Click the Next button and click
“Install this driver software anyway” if the Windows
Security window appears. Afterwards, please skip
to procedure 9.
6
. During the process of the installation, a message
“Windows can’t verify the publisher of this driver
software” might be prompted. Please ignore it,
and click on “Install this driver software anyway” to
continue the installation safely.
7
. When the system completes the installation, click
the Finish button.
8
. Follow the on-screen instructions to install all
software that your new scanner requires.
9
. After the software is installed, close all open
applications and click the Finish button to restart
your computer.
If your computer is off when the scanner is connected, the “Add New Hardware
Wizard” message will not be displayed until the computer is on and Windows starts.
>
4