Ambir ImageScan Pro 940u - Manual (Page 6)

Ambir ImageScan Pro
TM
940u Quick Start Guide
6
Scanning
There are three different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within any TWAIN-
compliant application programs.
2. By scanning from the buttons on the Scanner’s front panel.
3. By scanning from AmbirScan ADF’s Execute menu on the screen.
Scanning via TWAIN Interface
Select the Scan Source:
If you have more than one scanner or other imaging devices installed on your computer, you
need to set this scanner as the default scanning source before you acquire image data/scan
using a TWAIN compliant program:
1. For Presto! PageManager 9, Go to the File menu, click Select Source…
2. In the window that opens, choose this scanner and then click the OK button to set this
scanner as the default scanning source.
Scan with Presto! PageManager 9
1. Click the Windows Start button, go to Programs > Presto! PageManager 9 and then click
Presto! PageMananger 9 to launch the program.
2. You may adjust scan settings by going into the Tools drop down menu and selecting Scan
Settings… Here you may change Scan Mode, documents size, resolution and
enable duplex scanning.
3. To perform a scan, click . The system will prompt you to insert the item to be
scanned.
4. Insert the item and click OK.
5. The scanned image will appear as a thumbnail in the PageManager display area.