Ambir ImageScan Pro 940u - Manual (Page 7)

Ambir ImageScan Pro
TM
940u Quick Start Guide
7
Scanning from the Scanner’s Front Panel
Completing scanning projects using the scanner buttons is easy and convenient. The number
assigned to a scanning task displayed on the scanner’s front panel is configured through AmbirScan
ADF. AmbirScan ADF offers you quick access to the most frequently-used scanning functions. They
are especially useful when you need to repeatedly scan with the same settings and send images to
the same destination. Before performing your first scan via scanner buttons, first configure the button
settings with your preferences.
Scan with Scanner Buttons
1. Place the document or images onto the scanner. (Refer to the “Scanning” section of the Scanner
User Guide for more information about placing paper into the ADF properly).
2. Check current button settings by viewing the memo sticker or the Button Configuration window.
If needed, you may also modify settings to meet your current needs. (Refer to “Configure Button
Settings” and “View Button Settings” below for more information).
3. Press the UP or DOWN button to select the desired task.
4. Press the Scan button.
The scanner starts to scan immediately and carry out the corresponding action according to settings in
the Button Configuration window.
Scanning
(Continued)