Angelcare AC1100 - Manual (Page 10)

TO ADJUST THE VOX SENSITIVITY:
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit.
1) Press Menu icon to access
the main menu.
2) Press settings icon
to access sub-menu.
3) Press the VOX icon to activate
or deactivate the VOX function.
NOTE:
By deactivating VOX the Continuous
setting is ON.
4) Press OK to confirm.
1) Press Menu icon to access
the main menu.
2) Press settings icon
to access sub-menu.
3) Press VOX icon sensitivity to choose
sound sensitivity level (1 to 4).
4) Press OK to confirm.
ON OFF
VOX ON
(VOX) VOX OFF
(Continuous)
TO ACTIVATE VOX MODE:
1
1
OK
OK
2
2
OK
OFF
ON
ON
OK
OFF
ON
ON
3
3
Continuous Sound: ON
Speaker Volume: Level 3 (of 6)
Movement Mode: ON
Sensor Pad Sensitivity: Level 3 (of 5)
TIC: OFF
Temperature Alarm: OFF
Temperature Alarm Settings:
High Temperature Limit: 32˚
Low Temperature Limit: 5˚
VOX Mode: OFF
Alarm Mode: Sound alarm only
Video Camera: ON
DEFAULT SETTINGS
YOU ARE NOW READY
TO USE YOUR MONITOR
The Angelcare ® monitor can be used with the pre-program factory settings
or you can also customise your settings to your preference.
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
6.1 - VOICE ACTIVATION (VOX) OR CONTINUOUS SOUND MODE
Allows you to select your option on how you monitor sound:
VOX (voice activation picks up sound based on the setting of the sensitivity level) or
Continuous (sound monitoring is continuously on, picking up all sounds).
IMPORTANT
When in the menu or sub-menu
modes, sound transmission between
Parent and Nursery Units will be
temporarily deactivated. ONLY the
motion-detection alarm will remain
active (if function is activated).
OK
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by
pressing the
OK icon.
19 18