Austin Hughes CS - 116 - Manual (Page 10)

UM-CV-751-CS-116-Q215V1 www.austin-hughes.com
2.1.3 Web Management Interface
The IP serial console supports both HTTP and HTTPS (HTTP over SSL) protocols. The user must authenticate themselves by
logging into the system with a correct user name and password
To access the IP serial console Web management pages, enter the pre-set IP address or resolvable hostname into the web
browser’s URL/Location field. This will direct the user to the login screen.
Figure below shows the user homepage of the Web management interface. A menu bar, provided on the left hand side of the
screen. Selecting an item on the menu bar opens a tree view of all the submenus available under each grouping. Selecting a
submenu item will allow the user to modify parameter settings for that item.
Every page will allow the user to Save to flash, Apply or Cancel their actions. To apply all changes made, the user must select Apply.
Only when the user selects Apply will the new parameter values be applied to the IP serial console configuration and
go effective. But new settings are not saved to non-volatile memory (Flash) unless user clicks Save to flash button.
If the user does not want to save the new parameter values, the user can click Cancel. All changes made will be lost and the
previous values restored.
P.6
< 2.1 > Device Setup CS-116