Austin Hughes CS - 116 - Manual (Page 29)

UM-CV-751-CS-116-Q215V1 www.austin-hughes.com
CS-116
Firmware can be easily upgraded via web page. This section describes the upgrade procedures.
*The latest firmware version is available on the web site.
2.11.1 Prepare Upgrade Environment
1. Need to obtain a TFTP server software program.
2. Start up tftp server (e.g., tftpd32). The website below kindly provides the software.
http://perso.orange.fr/philippe.jounin/tftpd32_download.html.
3. Run the TFTP server software program, for example: tftpd32.exe
4. Select the directory folder where the upgrade image files reside at
For example: Z:\IP-console\Release\v1.0 & 082306
2.11.2 Upgrade from web page
Key in TFTP server IP address and image file name, then click Apply.
After a few seconds, the message Flash program finished successfully will be shown, meaning the new firmware
has been upgraded into the Flash memory.
P.25
Note :
There are three possible images can be upgraded. But not all of the three images should be upgraded
in each release. Most often, only need to upgrade the ramdisk image. The three images are:
■
extpar
■
zimage
■
ramdisk
< 2.11 > Firmware Upgrade