Austin Hughes CS - 116 - Manual (Page 24)

UM-CV-751-CS-116-Q215V1 www.austin-hughes.com
CS-116
5. Confirm the choice the screen below will show up.
6. Type in user name and password. Then the data channel connection between ESP and the selected serial port will
be built. So the administrator can control the serial device or server.
7. Press Ctrl and C keys to get out of Serial-to-Serial function and back to main console screen.
The web page also gives read-only settings of Serial-to-Serial function, it will auto-changed upon the setting change on
VT100 console. Click Cancel will refresh the values.
2.7.2 Serial Power Control Function
The serial power control function does not support for the CS-116.
P.20
< 2.7 > Serial-to-Serial Function