AutoPage C3-RS1100 OLED - Manual (Page 10)

Aug/2009
C3 RS-1000 OP 10
Press button 2 to set
the ”minute” digit to
“30”.
Press button 3 to start
the count down
timer and the icon
will flash on the main
page.
While the icon is
flashing , push the ” ”
button to display the
count down timer
Press button 2 to stop
the count down time.
C- P3- 4. “DAILY START TIMER” SETTING: Example: Set the Daily Start Timer to 05:00AM
Spin down the switch
to page 3
Press button 4 and
the ”hours” digit flashes
for adjusting. Press button 2 to set
the ”hours ” digit to “05”. Press button 1 and
the ”minute” digit
flashes for adjusting.
Press button 2 to set
the ”minute” digit to
“00” Press button 3 and the
setting is done. While the icon is
flashing push the ” ”
button to check the daily
start timer.
D- P4- 1. “NAME OF TX ” SETTING: Example: Set Name of Transceiver 1 to MIKE
Spin down the
switch to page
4
Press button1
and the “
- ” flash
for setting the 1
st
letter.
Spin down the
switch to set the
“M”. Press button 1
and the “ - ” flash
for setting next
letter.
Spin up the ”
switch to set
the ”I”.
Press button 1
and the “ - ” flash
for setting.
Spin down the
switch to set
the ”K”.
Press button 1
and the “ - ” flash
for setting.
Spin up the
switch to set
the ”E”.
Press button 3
done confirm
your program