AutoPage C3-RS1100 OLED - Manual (Page 5)

Aug/2009
C3 RS-1000 OP 5
While the
TRIGGERED icon
is flashing.
Push the
button to display
triggered area.
While the
Push the button to see the display
While the
icon is flashing
Push the
button, the c ount
down timer will
display.
Press button 2 to
turn off the count
down time
or or
While the icon flash Push the button, the OLED screen will display these icons individually i.e. daily
s tart timer, timer start or temperature start, depend on which you selected. PLEASE
BE SURE YOU FULLY UNDERSTAND THESE FEATURES AND USE EXTREME CAUTION
SO THAT THE VEHICLE IS NOT IN AN ENCLOSED AREA WHILE RUNNING!
While the icon is
flashing
Push the button, the alert
alarm time will display.
Press button 2 to turn off the
alert alarm timer
D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:
1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen will
display the transceiver button configuration you have selected.
2. Within 5 seconds press buttons 1, 2, 3 or 4 for the remote control “button configuration” you have
selected.
Note: If 5 seconds of inactivity expired, or you push the button, the transceiver button configuration mode
will exit.