AutoPage C3-RS1100 OLED - Manual (Page 4)

Aug/2009
C3 RS-1000 OP 4
B. CHARGING THE BATTERY
The XT-1100 is powered by a built-in 3.7V lithium polymer battery. If
the OLED screen display low battery or
is flashing, charge
your remote transceiver. While the battery of the Remote
Transceiver is being charged, you can push the ” ” button to check
charging condition.
1 . ONLY CHARGE THE TRANSMITTER WITH THE
INCLUDED USB WALL CHARGER .
2. Charging is difficult in places subject to extremely high/
low temperatures.
3. To protect the battery, it is recommended to temperature
charge in places with temperature of 5 C to 35 C (41 F to
95 F).
4. When the remotes power is under 30%, the range of the
unit will be reduced to save power. Please charge the
battery.
While the battery is
charging
Push the button; the
screen will display
Battery charging.
C. MAIN PAGE:
1. Press the button, the screen will display the main page.
2. While the icon is flashing on the OLED screen, press the button, the OLED screen will display the
details of the flashing icon. The display sequence of flashing icon is as follows: TRIGGERED / ENGINE
RUNNING / COUNT DOWN TIMER / TIMER START / ALART TIMER condition.
switch
Button
Button 1
OLED Display
Button
Button 3
Button
Button 2
Button
Button 4
switch
button
Antenna
Charge Input
USB Input