Chicago Gaming Arcade Legends - Manual (Page 4)

3. ARCADE SETUP MENU
Press the test button which is located behind the faux coin-door to access the
ARCADE SETUP MENU. The test button can be accessed without opening the faux
coin-door by pressing the coin-return button. If you want to limit access to the TEST
button, open the faux coin door and control panel, loosen the nut on the back of the TEST
button and move it to the left. Be sure to retighten the nut. To choose a menu option,
move the arrow or cursor so that the desired option is highlighted. This is done using the
player one joystick. When the desired option is highlighted, press player one button one
to select it and enter that submenu. In this manual the term “highlight” will mean to
position the arrow over the desired option. The term “select” will mean to press player
one, button one. The exit option on all menus will always go back to a previous menu.
After you press the test button, you will see the ARCADE SETUP menu which will
allow you to access the following:
3.1 LANGUAGE
Move the joystick to the left and right to access the following languages: English,
French, German, Swedish, Italian, and Spanish.
3.2 SOUND VOLUME
This menu option allows you to set the Sound Volume level between one and ten. To
adjust, highlight Sound Volume on the ARCADE SETUP MENU (Fig. 3-1) and move
the joystick to the left or right. Sound for the entire system can be turned off by setting
the value to ZERO.