Chicago Gaming Arcade Legends - Manual (Page 6)

3.4 DIAGNOSTICS
3.4.1 CONTROL TEST
This test is used to check the functionality of the player controls. Operate each player
control in turn. Each button press or joystick direction will light when activated. If any
controls are not functioning, go to the trouble shooting section. To exit the control test
press both player one and player two start buttons. If one or both start buttons are not
working the control test screen will automatically timeout in fifteen seconds.
3.4.2 JAMMA TEST
The JAMMA Test is similar to the Control Test but it is expanded to encompass the
entire JAMMA harness and connector. Operate each player control in turn through the
JAMMA Test screen and check that it lights up on the screen. This process confirms the
proper working order of the test button, coin drop, and wiring features. To exit the
JAMMA Test press both player one and player two start buttons or wait fifteen seconds
for the test to timeout and exit.
3.4.3 SOUND TEST
Left Channel: You will hear the sound coming from the left speaker.
Right Channel: You will hear the sound coming from the right speaker.
Stereo Test: You will hear the sound coming from both speakers.
High Frequency: You will hear a high pitched sound coming from both speakers.
Low Frequency: You will hear a low pitched sound coming from both speakers.
3.4.4 VIDEO TEST
This feature is a utility to use when making adjustments to the video monitor. When
started, the test will cycle through the following screens: Red, Green, Blue, Color Bars,
and pin cushion.