Chicago Gaming Arcade Legends - Manual (Page 7)

3.5 CABINET SETUP
3.5.1 RESET FACTORY DEFAULTS
This switch returns all settings to the default state prior to the consumer adjustments.
3.5.2 CABINET TYPE
Use Upright for stand up game, and Cocktail for sit down cocktail table configurations.
3.5.3 SOUND OUTPUT
Stereo setting produces different sound output from each speaker and Mono produces
same sound output from each speaker. Both speakers are used in each setting.
3.5.4 CGA INTERLACE
Off will reduce the screen resolution to 320x240 to reduce flicker in Standard resolution
monitors. On should be used for VGA monitors.
3.5.5 CGA INTERLACE TUNING
When CGA Interlace is OFF, this setting us used to tune the monitor interlacing to reduce
flicker in the interface. This setting has no effect on VGA monitors.
3.5.6 EXIT MENU TIMOUT
The exit menu timeout will make the exit menu return to the main interface automatically
after a set period of time. When Off the exit game button will act as a pause button.
3.5.7 GAMES / MOVIE INTERVAL
This setting sets the amount of games that are shown in the interface before the attract
mode movie and credits are shown. The default value is 3.