Chicago Gaming Nicktoons Nitro - Manual (Page 34)

Nicktoons Nitro • Copyright 2008 • Raw Thrills • All rights reserved .
34
Reset Link System Configuration Menu
From the Utilities Menu, select Reset Link System Config and enter. This utility allows the communication between
linked games to be re-established due to a possible fault other than hardware. Check all network related hardware
(cables, router) and make sure that they are connected and then power cycle the games. Press Start to Select. Press
Service to Exit.
Factory Restore Menu
From the Utilities Menu, select Factory Restore and enter. Performing Factory Restore will restore game adjustments
back to its manufacturer recommended settings and clear all audit information. The game will need to be re-calibrated.
Press Start to Select. Press Service to Exit.
Vol +/-, View to Navigate
Test, Start to Select
Service, Exit to Exit
Confirmation:
Select “Yes” to carry
out this utility.
Select “Cancel” to
return to the previous
menu.
This will cause the Link
System configuration to
be reset. The Link
System will not function
until the machine
reboots.
REALLY Reset Link
System Config?
Yes (All Linked Games)
Yes (This Game Only)
Cancel
Vol +/-, View to Navigate
Test, Start to Select
Service, Exit to Exit
Confirmation:
Select “Yes” to carry
out this utility.
Select “Cancel” to
return to the
previous menu.
REALLY Perform CRC Check?
Yes (All linked machines)
Yes (This machine only)
Cancel