Ditch Witch JT1220 - Manual (Page 158)

JT1220 Mach 1 Operator’s Manual
Complete the Job - 157
Antifreeze Drilling Unit
CMW
Reclaim Antifreeze
1. Connect remote fluid system. See page 89.
2. Turn on remote fluid system engine.
3. Start drilling unit and run at low throttle.
4. Move carriage to front of drill frame.
5. Position 3-gal (11-L) bucket under spindle.
6. Turn drilling fluid pump on low speed.
7. Turn drilling fluid pump off when drilling fluid comes out of spindle.
8. Open hood and pour antifreeze into tank.
IMPORTANT: Antifreeze can be removed from antifreeze tank and disposed of properly or it can be
reused until it is too diluted with drilling fluid to protect against freezing.