Ditch Witch JT1220 User Manual
Page 179
Advertising
Service - 178
JT1220 Mach 1 Operator’s
Manual
50 Hour
CMW
Inspect Thrust Rollers
Inspect thrust rollers every 50 hours. Clean or
replace if they do not turn freely.
Lubricate Rotation Gearbox Sliding
Output Shaft
Lube rotation gearbox sliding output shaft with
EPS every 50 hours.
To lube:
•
Stop engine and turn battery disconnect
switch to the off position.
•
Clean exposed portion of sliding output shaft
with pressure washer to remove grime.
•
Blow dry with compressed air.
•
Apply EPS spray lube to all exposed shaft
surfaces while manually moving the shaft in
and out.
•
Turn battery disconnect switch to the on position.
Advertising