Ditch Witch MR90 - Manual (Page 4)

MR90 Operator’s Manual
Overview - 3
Intended Use
CMW
®
Intended Use
The MR90 is a self-contained fluid handling unit capable of mixing and recycling drilling fluid and
transferring fluid under pressure to the drilling unit. It is intended for operation in ambient temperatures
from 32° to 115°F (0° to 46°C). Use in any other way is considered contrary to the intended use.
The MR90 can be used with Ditch Witch
®
drilling units. It should be operated, serviced, and repaired only
by persons familiar with its particular characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.