Ditch Witch MR90 - Manual (Page 71)

Complete the Job - 70
MR90 Operator’s Manual
Dispose of Fluid
CMW
®
Dispose of Fluid
Dispose of unneeded fluid and waste products
using one of the methods described below.
1. Hook vacuum unit directly to MR90
connectors.
• Connect at 1 to drain clean side tank.
• Connect at 2 to drain dirty side tank.
• Connect at 3 to drain optional spoils
hopper.
2. Open optional spoils hopper door to dump
waste products. See “Spoils hopper door
control (optional)” on page 36.
Moving parts could cut off hand or foot. Stay away.
275-184
To help avoid injury: Never place hands through spoils door unless
engine is off and battery is disconnected.
Rotating shaft will cause death or serious injury. Stay
away. 270-1506
To help avoid injury: Leave cover on spoils hopper.
IMPORTANT:
• Some areas may have regulations regarding
the disposal of waste products. Consult local
regulations.
• If a gelling agent is required, Baroid
®
IDP-
428 is recommended.