Ditch Witch RT Line - Manual (Page 21)

Operation Overview - 20
RT12/RT16/RT20/RT24 Operator’s Manual
Planning
CMW
Planning
1. Gather information about jobsite. See page 31.
2. Inspect jobsite. See page 33.
3. Classify jobsite. See page 34.
4. Select best chain type and tooth pattern for your application. See page 62.
5. Consider optional equipment, if necessary. See page 64.
6. Check supplies and prepare equipment. See page 36.
7. Load unit onto trailer. See page 43.
Trenching
1. Unload unit from trailer. See page 46.
2. Leave optional backfill blade, if equipped, in stowed position with digging boom low to ground.
3. Start unit. See page 38.
4. Drive to starting point of trench. See page 39.
5. Dig the trench. See page 51.
6. Shut down unit. See page 39.
Leaving Jobsite
1. Restore the jobsite. See page 70.
2. Rinse unit and stow tools. See page 70.
3. Load unit onto trailer. See page 43.