Ditch Witch 250RT - Manual (Page 12)

250R/T Operator’s Manual
Safety - 11
Safety Alerts
CMW
Safety Alerts
Electric shock. The connection leads may give off an electric shock when plugged into the
transmitter. Avoid touching the metal ends of clips when the transmitter is switched on.
NOTICE:
• Electric shock or equipment damage can result if transmitter is connected to live electrical conductors.
Observe all company and national safety procedures.
• Turn off transmitter when connecting or moving ground stake.
• Always comply with company and national safety requirements. Use correct equipment and working
methods. Use and maintain proper safety equipment.
Explosion possible. Serious injury or equipment damage could occur.
Follow directions carefully.
NOTICE: Do not use equipment in areas where flammable gases may be present or near to
radio-controlled blasting operations.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
NOTICE: Some buried utilities do not radiate a detectable signal. Always continue checking
during excavation and ensure compliance with HS(G)47.
IMPORTANT: Ditch Witch receivers and transmitters are calibrated to tolerances under strict
environmental conditions. Under normal daily use, Ditch Witch equipment does not require an annual
calibration. A daily functional check is recommended and any units which have been damaged or do not
appear to perform to original factory specifications should be returned to the manufacturer or authorized
repair center for calibration check or repair.