Ditch Witch 250RT - Manual (Page 40)

250R/T Operator’s Manual
Service - 39
Transmitter Error Messages
CMW
Transmitter Unit
Change Batteries
Use six D-cell alkaline batteries in transmitter.
1. Open battery cover.
2. Insert batteries as shown.
3. Close cover and tighten battery cover.
4. Check operation. If battery light is flashing
when unit is turned on, then one battery is
incorrectly installed or batteries are weak.
Transmitter Error Messages
Red LED with No Tone
If red LED flashes with no tone in direct connect or induction clamp mode, the unit has detected a short in
one of the leads or on the target line.