Ditch Witch 250RT - Manual (Page 26)

250R/T Operator’s Manual
Locate - 25
Active Location
CMW
Technique
1. Walk in an arc approximately 25’ (7.5 m) around transmitter.
2. Hold the receiver as shown.
3. Identify location of line by finding the spot with the best signal response.
IMPORTANT: Follow steps 1-3 for all types of active location. For reference, the illustration above
shows direct connection method. If using broadcast induction, ensure that transmitter is in line with and
above suspected line, as shown on previous page.
ss1131h.eps
7.5
m
25
ft