EarthQuake MC43ES - Manual (Page 27)

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 27
Operator’s Manual
800 Watt Inverter Generator
(4) Repair or replacement of any warranted part under the
warranty must be performed at no charge to the owner
at a warranty station.
(5) Notwithstanding the provisions of subsection (4) above,
warranty services or repairs must be provided at all
Ardisam distribution centers that are franchised to service
the subject engine/equipment.
(6) The owner must not be charged for diagnostic labor
that leads to the determination that a warranted part is
in fact defective, provided that such diagnostic work is
performed at a warranty station.
(7) Ardisam is liable for damages to other engine/equipment
components proximately caused by a failure under
warranty of any warranted part.
(8) Throughout the emissions warranty period defined in
subsection (B)(2), Ardisam must maintain a supply of
warranted parts sufficient to meet the expected demand
for such parts.
(9) Any replacement part may be used in the performance
of any warranty maintenance or repairs and must be
provided without charge to the owner. Such use will not
reduce the warranty obligations of Ardisam.
(10) Add-on or modified parts that are not exempted by the
Air Resources Board may not be used. The use of any non-
exempted add-on or modified parts will be grounds for
disallowing a warranty claim. Ardisam will not be liable to
warrant failures of warranted parts caused by the use of a
non-exempted add-on or modified part.
(11) Ardisam issuing the warranty shall provide any
documents that describe that manufacturer’s warranty
procedures or policies within five working days of request
by the Air Resources Board.
(D) Emission Warranty Parts List.
(1) Fuel Metering System
(i) Carburetor and internal parts (and/or pressure
regulator or fuel injection system).
(ii) Air/fuel ratio feedback and control system.
(iii) Cold start enrichment system.
(iv) Fuel Tank.
(2) Air Induction System
(i) Controlled hot air intake system.
(ii) Intake manifold.
(iii) Air filter.
(3) Ignition System
(i) Spark Plugs.
(ii) Magneto or electronic ignition system.
(iii) Spark advance/retard system.
(4) Exhaust Gas Recirculation (EGR) System
(i) EGR valve body, and carburetor spacer if applicable.
(ii) EGR rate feedback and control system.
(5) Air Injection System
(i) Air pump or pulse valve.
(ii) Valves affecting distribution of flow.
(iii) Distribution manifold.
(6) Catalyst or Thermal Reactor System
(i) Catalytic converter.
(ii) Thermal reactor.
(iii) Exhaust manifold.
(7) Particulate Controls
(i) Traps, filters, precipitators, and any other device used
to capture particulate emissions.
(8) Miscellaneous Items Used in Above Systems
(i) Electronic controls.
(ii) Vacuum, temperature, and time sensitive valves and
switches.
(iii) Hoses, belts, connectors, and assemblies.
Ardisam will furnish with each new engine/equipment written
instructions for the maintenance and use of the engine/
equipment by the owner.