Echelon FTXL - Manual (Page 144)

132 Neuron C Syntax for the Model File
network output SNVT_amp nvoAmpere;
network output polled SNVT_time_stamp nvoInstallDate;
fblock SFPTopenLoopSensor {
nvoAmpere implements nvoValue;
nvoInstallDate implementation_specific(128)
nvoInstall;
} fbAmpereMeter external_name("AmpereMeter")
fb_properties {
cpDefaultOutput, // optional CP
cpDisplayBrightness = {50.0, 1} // impl-specific
};
Network Variable Syntax
The syntax for declaring a single network variable object is:
network input | output [
netvar-modifier ] [ storage-class ] type
[ connection-info ] identifier
[ = initial-value ] [ nv-property-list ] ;
The syntax for declaring an array of network variables is:
network input | output [
netvar-modifier ] [ storage-class ] type
[ connection-info ] identifier [ array-bound ]
[ = initializer-list ] [ nv-property-list ] ;
The brackets around array-bound are shown in bold type. The brackets do not, in
this case, indicate an optional field. They are a required part of the syntax for
declaring an array, and must be entered into the program code.
Network variable arrays can only be single dimension. The array-bound must be
a constant. Each element of the array is treated as a separate network variable
for purposes of events, transmissions on the network, and so on. Therefore, each
element counts individually towards the maximum number of network variables
on a given device. Each element of the array is a separately bindable network
variable.
Keywords
network
Declares a network variable of a specific type and with a specific identifier .
input | output
Defines the direction (input or output) for the network variable, from the
point of view of the FTXL Transceiver.
The Network Variable Modifier
The optional netvar-modifier specification for a network variable includes the
following keywords: