Echelon FTXL - Manual (Page 249)

FTXL User’s Guide 237
LID# Description
62 Insufficient buffer space
The message includes the total number of bytes available for
transceiver buffers and how many additional bytes your selected
configuration requires.
Warning codes
(warning codes start at 4000)
LID# Description
4001 An XIF file contains more fields than expected
Refer to the warning message for line # and filename. This might
result in an automatic downgrading of the device interface file to the
version supported by the FTXL or ShortStack tools. Check
www.echelon.com for available updates.
4002 An intermediate file cannot be removed in the sweep-phase. See
message for details
Refer to the warning message for details about the warning cause.
The sweep occurs when the utility’s operation is complete and the
utility did not run in the Trace verbosity level. The warning indicates
that an intermediate file cannot be removed.
4003 Warning code not in use.
4004 Warning code not in use.
4005 Warning code not in use.
4006 A file cannot be copied
This is possibly, but not necessarily, fatal. When the LonTalk
Interface Developer utility creates the host framework, it produces
several files based on input provided by the user. It also copies the
necessary files into the destination folder. The utility-generated files
refer to these files, which are required to build the host application.
Thus, this issue is non-fatal for the LonTalk Interface Developer
utility, but probably fatal when building the host application. See
also warning LID#4017.
4007 Warning code not in use.
4008 Warning code not in use.