Echelon FTXL - Manual (Page 248)

236 LonTalk Interface Developer Utility Error and Warning Messages
LID# Description
46 One or more configuration parameters implemented within a file are
present, FTP or DMF must be implemented
Alternatively, you can declare configuration properties as
configuration network variables.
47 The file transfer protocol (FTP) and direct memory files (DMF) access
mechanisms are mutually exclusive
48 Error code not in use.
49 The FTP server interface is partially implemented, missing the
specified member of the node object
50 Data files and file directory are too big for the available space.
Available: <n> bytes, required: <m> bytes (missing: <p> bytes)
[LID#50]
Possible remedies: reduce the size of files by removing extraneous
data files, or by sharing CP, or implement FTP.
51 Malformed XML data (cannot convert to expected type)
52 The specified application framework type is unknown
53 No target framework has been supplied, or the requested framework
is not registered with, or not known to, the Builder
54 No code generator found for the selected target framework
55 The specified framework is not yet supported
This is an internal error.
56 Error code not in use.
57 Required source file missing
58 Error code not in use.
59 Too many network variables. The sum of static and dynamic
variables cannot exceed 4096.
60 Insufficient number of addresses
This message includes how many addresses are require for the
application, and how many were specified.
61 The DMF window specification is invalid, as it exceeds the 64 KB
address range