Echelon i.LON 10 Ethernet Adapter - Manual (Page 67)

that if your PC is not on the 192.168.1.x subnet, you may have to change the IP
settings of your PC to communicate with the i.LON 10 Ethernet Adapter or use
the route command described in the Quick Start and in Performing a Security
Access Reset.
Rebooting the i.LON 10 Ethernet Adapter
To reboot the i.LON 10 Ethernet Adapter, click the Reboot link on the i.LON 10
Web page. The following Web page opens:
To reboot the i.LON 10 Ethernet Adapter, click Reboot Now. You will have to
wait approximately two minutes for the reboot to complete.
i.LON 10 Ethernet Adapter User’s Guide 7-15