Echelon LonWorks Network XML User Manual
Page 26
18
Using the XML Schema
The possible values are as follows:
0 ConfiguredRouter
1 LearningRouter
2 RepeaterRouter
3 BridgeRouter
4 PermanentRepeaterRouter
5 PermanentBridgeRouter
If you do not specify the Class property when
you create a router, “Configured Router” is the
default router type.
Location
Y
Y
The location value reported as 12 hex digits.
LocationText
Y
Y
The location value reported as ASCII text.
Non-printable ASCII characters are reported as
\xHH, where HH is two hex digits.
If both the Location and LocationText
properties are specified, the value in the
Location property will be used on import.
Description
Y
Y
The optional user-provided description for the
router.
AuthenticationEnabled
Y Y An
enumerated value indicating whether
authentication is enabled on the device. The
possible values are as follows:
0
False
1
True
InitialAuthenticationKey
Y
Y
This value is only reported on export if the value
is non-empty.
Shape/StencilName Y Y The
name
of
the Visio stencil containing the
master shape for the router. If you do not
specify this property or it is not found on import,
the LonBasic stencil is used.
Shape/MasterName Y Y The
name
of
the master shape for the router. If
you do not specify this property or it is not
found on import, the router shape in the
LonBasic stencil is used.
Shape/PinX
Y Y The
X
coordinate of the router shape in the
Visio page.
Shape/PinY
Y Y The
Y
coordinate of the router shape in the
Visio page.
CommissionStatus
Y
N
An enumerated value indicating the current
router configuration on export. The possible
values are as follows:
0 UpdatesCurrent
1 Updates
Pending
2 UpdatesFailed
AttachmentStatus Y N An
enumerated value indicating whether the
router is communicating with the network on
export. The possible values are as follows:
0 Attached
1 InImproperState
2 NotAttached