Echelon LonWorks Network XML - Manual (Page 28)

20 Using the XML Schema
<Location>800600000000</Location>
<Description/>
<AuthenticationEnabled ID="0">False</AuthenticationEnabled>
<Shape>
<StencilName>LonPoint3</StencilName>
<MasterName>LonPoint Router</MasterName>
<PinX>4.510000</PinX>
<PinY>2.620000</PinY>
</Shape>
<Class ID="0">ConfiguredRouter</Class>
<PingClass ID="4">Permanent</PingClass>
<CommissionStatus ID="1">UpdatesPending</CommissionStatus>
<AttachmentStatus ID="0">Attached</AttachmentStatus>
<Extensions>
</Extensions>
<NearRouterSide>
<NeuronId>000000000000</NeuronId>
<Channel>Channel 2</Channel>
<Priority>0</Priority>
<Subnet Handle="2">
<Name>Subnet_1_2</Name>
<NodeId>2</NodeId>
</Subnet>
</NearRouterSide>
<FarRouterSide>
<NeuronId>000000000000</NeuronId>
<Channel>Channel 3</Channel>
<Priority>0</Priority>
<Subnet Handle="4">
<Name>Subnet_1_3</Name>
<NodeId>1</NodeId>
</Subnet>
</FarRouterSide>
</Router>
</Routers>
Application Devices
Attributes
Attribute
Applicable
Values Description/Notes
Action 1 IGNORE
2 CREATE
3 CREATE_UNIQUE
4 UPDATE
5 MODIFY
6 DELETE
7 COMMISSION If you are creating an application device, you
must specify the device’s Name, Device
Template, and Channel properties.
If you specify the COMMISSION, the device
properties are not updated, but the device’s
functional blocks are processed.
Ref <reference name> Allows references to the application device in
NV/MT target definitions. See Targets for more
information on using application device
references.
Image <File Name> Specifies the name of the application image
(.APB) to be written to the device. The file path
can be absolute, or relative to an application