Echelon LonWorks Network XML - Manual (Page 29)

L ON W ORKS Network XML Programmer’s Guide 21
image search path.
If an application image is specified, the file
exists, and the Commission attribute is set to
True, the image is written to the device. This
field is empty by default.
Commission 0 False
1 True You must set this property to True to enable
commission-related operations.
State 0 DEFAULT
1 ONLINE
2 OFFLINE
3 DISABLE
4 RESTORE You can specify the state of the router
application. The default is DEFAULT, which
indicates the settings of the LNS application are
to be used.
CP 0 FROM_DB
1 FROM_DEVICE
2 DEFAULTS Specifies the handling of CP values in an
application device.
If you specify DEFAULTS, the default CP
values are stored in the device template are
written to the LNS network database and the
application device.
If you specify FROM_DEVICE, the current CP
values stored in the application device are
written to the LNS network database.
If you specify FROM_DB, the current CP
values stored in the LNS network database are
written to the application device. This is the
default.
DevCP 0 INCLUDE
1 EXCLUDE
2 UPLOAD
3 ONLY Specifies the handling of device-specific CPs:
If you specify INCLUDE, the device-specific
CPs are handled using the same value specified
in the CP attribute.
If you specify EXCLUDE, device-specific CPs
are not updated. This is the default.
If you specify UPLOAD, device-specific CPs
stored in the application device are written to the
LNS network database, regardless of the value
specified in the CP attribute
If you specify ONLY, the device-specific CPs
are handled using the same value specified in the
CP attribute, but non–device-specific CPs are
excluded.
Properties
Supported by
Function?
Property Export Import Description/Notes
Name Y Y Application devices are reported in the
subsystem in which their shapes are defined;
they are not reported in the subsystems in which
their functional blocks have shapes.