Echelon NodeBuilder FX - Manual (Page 104)

90 Creating and Using Device Templates
4. The LonMaker Backup dialog opens.
5. Select the Backup Drawing, Backup Database, Backup NodeBuilder Project check boxes
under Backup Selection (the Backup Drawing and Backup Database check boxes are selected
by default), and then click OK.
6. The LonMaker drawing, LNS network database, and the NodeBuilder project are all stored in a
single LonMaker backup file (.zip extension) that is specified in the Backup File property
(C:\LM\Backup\<LonMaker network>\<LonMaker network>_<index>.zip by default).