Echelon NodeBuilder FX - Manual (Page 41)

NodeBuilder FX User's Guide 27
4. Connect the orange network connector on each FT 5000 EVB to the included network cable.
5. Use the included U10 USB Network Interface to attach the computer running the NodeBuilder
tool to the TP/FT-10 channel. To do this, connect the black network connector on the network
cable to the U10 USB Network Interface, and then plug the U10 USB Network Interface into an
available USB port on your computer. You can use the included USB extension cable to help
connect the USB 10 Network Interface to your development computer.