Echelon NodeBuilder FX - Manual (Page 48)

34 NodeBuilder Quick-Start Exercise
g. Select the Network Attached check box and then select the network interface attached to
your LonMaker computer that is to be used for communication between the LonMaker tool
and your development platform or platforms.
You can use the U10 or U20 USB Network Interface included with your development
platform, or you can use another network interface such as a PCC-10, PCLTA-20,
PCLTA-21, i.LON 10 Ethernet Adaptor, i.LON server. If you are using the U10 or U20 USB
Network Interface included with the NodeBuilder tool and you have not installed any other
network interfaces on your computer, select LON1.
For more information on installing and configuring the U10 or U20 USB Network Interface,
and on using it to attach your computer to a network channel, see the L
ON W ORKS USB
Network Interface User’s Guide.
h. Click Next. The Management Mode page appears.