Echelon NodeBuilder FX - Manual (Page 220)

206 Building and Downloading Device Applications
changed. This status is unlikely to occur.
Link required. Applies to device template targets only. Indicates that
one of the libraries or the system image has been modified since the
application image was last built or that a property has been changed that
requires the project be re-linked.
Export required. Applies to device template targets only. Indicates
that a property has been changed that requires the device to be exported.
Load required. Applies to targets only. Indicates that the application
image has been modified since the target was last loaded. The
NodeBuilder tool will only be aware of loads performed by the
NodeBuilder or LonMaker tools. If you load the application with
another tool, the NodeBuilder tool will not update the status until the
application is built and loaded using the NodeBuilder or LonMaker
tools. The Load required status is undetermined when you use the
NodeBuilder tool as a standalone application.
Setting Build Options
You can set build properties that control the build process. To set build properties, follow these steps:
1. Click Project and then click Settings, or click the Project Settings button ( ) in the Project
toolbar. The NodeBuilder Project Properties dialog opens with the Build tab selected.
Alternatively, you can right-click the Project folder at the top of the Project pane, click Settings
on the shortcut menu, and the click the Build tab; or click Tools, click Options, and then click the
Build tab.
2. Set the following options for building device applications:
Stop Builds on Determines when a build is stopped. A build may be stopped when an
error or warning is returned, or upon completion. The default is
Errors. If Do not stop is selected and an error occurs, the build