Echelon DM-21 Device Manager - Manual (Page 63)

Device Manager User’s Guide 5-11
17. Click Next. The window in figure 5.10 will appear:
Figure 5.10 - Status
It may take several minutes to load a Device Manager depending on the size
of the managed device list and whether the Device Manager’s application
image is also being loaded. Loading progress is displayed by the loading
wizard. When all Device Managers are loaded, additional Neuron IDs can be
collected, the existing Device Managers can be reloaded, or the loading
wizard can be exited.
18. Click Finish to exit the loading wizard.
19. Attach the Device Manager to the L ON W ORKS network. The Device Manager
will automatically begin finding and installing the nodes defined in the
LonMaker network drawing.
Testing the Example Device Manager
Test the example Device Manager using the following steps:
1. Attach the LonPoint DI-10 and DO-10 modules to the network. Connect LEDs
to the DO-10 module and switches to the DI-10 module.
2. Supply power to the DI-10 and DO-10 modules. Ensure that both modules are
in the unconfigured state, i.e., the service LEDs are blinking. If the service
LEDs are not blinking, force the LonPoint modules into unconfigured states