Echelon DM-21 Device Manager - Manual (Page 65)

Device Manager User’s Guide 5-13
Figure 5.11 – LonMaker Device Creation Wizard
A device’s location string may be at most 6 characters in length. If a 4
character location string is entered, the LonMaker tool will fill the remaining
characters with the HEX value 00. Choose a 6 character ASCII location for
each of the LonPoint DO-10 modules, e.g., “LEFTDO” and RGHTDO”.
4. From the Device Manager Shapes stencil drag and attach a DM-21 Device
Manager to the default channel that the LonMaker tool provides upon start
up.
5. From the LonPoint Shapes stencil drag and drop two Digital Input functional
blocks in the LonMaker network drawing (use Digital Input[0] and Digital
Input[1] from the DI-10 device).
6. From the LonPoint Shapes stencil drag and drop a Digital Output functional
block to the drawing (use Digital Output[0] from the DO-10 device labeled
LEFTDO).
7. From the LonPoint Shapes stencil drag and drop a Digital Output functional
block to the LonMaker drawing (use Digital Output[0] from the DO-10 device
labeled RGHTDO).
8. Connect the Digital Input[0] to LEFTDO’s functional block, and Digital
Input[1] to RGHTDO’s functional block.