Echelon DM-21 Device Manager - Manual (Page 83)

Device Manager User’s Guide 6-9
Parameter: Device index of the commissioned device.
Default Text: Device commissioned
The DMEVNT_DEVICE_COMMISSIONED event is issued when a device in
the system is successfully commissioned by the Device Manager. When this
event is generated, the device has been integrated into the network.
NOTE: The default Send Async value for this event is
TRUE
.
DMEVNT_DEVICE_COMMISSION_FAILED
Event Number: 13
Parameter: Device index of the device that failed to commission.
Default Text: Device commissioned
The DMEVNT_DEVICE_COMMISSION_FAILED event is issued when a
device is discovered, but cannot be successfully commissioned. This could
happen if the device loses power or goes applicationless during the
commissioning process. The device is not integrated into the network, but if it
remains attached and functional, the Device Manager will discover it and
attempt to commission it again.
DMEVNT_FATAL_ERROR
Event Number: 16
Parameter: None
Default Text: Fatal error
The DMEVNT_FATAL_ERROR event is issued when the database algorithm
executes successfully, but the database is corrupted or fails to open. The
Device Manager cannot proceed with generating the Managed Device List
until this problem is resolved.
Using the Event List Editor
The Device Manager can report several events of interest to monitoring
applications. Each event has a text string, an event code, a severity flag, and a
flag indicating whether the Device Manager should send the event as it occurs.
The severity of events, and whether events should be sent asynchronously is
application dependent. Each user must decide what makes sense for each system
and application. By default all events have the same severity and only the
DEVICE_COMMISSIONED event is sent asynchronously. However, severity,
whether to send asynchronously, and the text string associated with each event
can be changed. The Event List Editor utility is used to make these changes.