Electrocompaniet ECT 3 User Manual
Page 24
24
Firmware
4. Detect Serial Port.
When you get this window, please connect
your USB cable between the computer and
the product you want to update.
5. Detect Current Firmware
When you get this window, use the automatic
identification, or select the product you want to
upgrade from the list.
As soon as the system has detected current ver-
sion, please press next.
6. Firmware Detection Information
You will find a list with latest version, and
also the recommended version to install.
7. Download new firmware to board
If you want to reset all setup stored in your sys-
tem, please mark out the selection box.
Press start firmware upgrade to start program-
ming new firmware to your system.
When the upgrade is ready you get the
message,upgrade result: Upgrade successful.