Electrocompaniet ECT 3 - Manual (Page 4)

4
EC 4.8 V 2.05
General use
Connection indicator
Battery level
Software version
Volume priority
presents the unit for
main volume
Beep ON or OFF
1.4 Before you start using the system
Step 1
We recommend to charge the battery before using the ECT 3 for the
first time. The procedure is described in the chapter: "charging the
batteries"(page 6) However, you don't need a full charge to use the ECT 3
Step 2
When you are finished with step 1 you are ready for the first setup of
your ECT 3.
When starting up the remote control for the first time, the main ECT 3
page will be the only accessible page / unit.
The picture underneath shows the meaning of the different symbols: