Electrocompaniet ECT 3 - Manual (Page 7)

7
General use
1.7 Using the ECT 3
By using the wheel you can scroll
through a list of Electrocompaniet pro-
ducts. Choose all products you like to
control by the ECT3 and activate or
deactivate them by pressing OK.
An “x” will indicate the products
chosen.
Press EXIT for the previous page.
2.Volume priority: All activated products
with volume control are listed here (pre-
amp, integrated amps, D/A converters).
If you have selected more then one prod-
uct with volume control in the product
list you are able to put one of them
on volume priority. This means the
volume + and – buttons on your
remote control will always control
this unit regardless of the chosen
page or menu. In most cases you
will only find one product in this list
and this unit will automatically have
the volume priority.
Press MENU button and ECT 3 menu
page will appear.
1. Create a list of devices you want to
manage
Buzzer off Batt
Vol: ECI 4/5 77%
ECT 3 V 2.05
Setup ECT 3
Volume Priority
Beep on/off
Power Mode
Connect
Acceleration Sensor
Deep Sleep
Wheel mode.
When icon at the
display
:
Joystick mode.
When icon at
the display
:
The wheel is used on 2 different ways:
You can either scroll through the menu and use OK button to confirm
or you can activate or change values inside the menu by pressing the
arrow left/right or up/down