Elenco Projects 1-101 - Manual (Page 33)

-32-
Project #66 Electronic Bombing Game
OBJECTIVE: To make an electronic bombing game.
Build the circuit at left. It uses both
jumper wires as permanent
connections. It also uses two 2-snap
wires as “shorting bars”.
Setup: Player 1 sets the target by
placing one shorting bar under the
paper on row B, C, or D. Player 2
must NOT know where the shorting
bar is located under the paper.
The object is for Player 2 to guess
the location by placing his shorting
bar at positions X, Y, or Z. In the
drawing on the left Player 1 set up
this hole at position “D”. If Player 2
places his shorting bar across “Z” on
the first try then he gets a hit. He
keeps guessing until he hits. After
each hit, remove the shorting bars
and slide the switch off and on to
reset the sound.
Player 2 then sets the B, C, D side
and player 1 tries his luck.
Play multiple rounds and see who
gets the best overall score. The
winner will be the player who is best
at reading his opponent’s mind.
Shorting Bar for
B, C, or D.
Paper Sheet to
hide position of
shorting bar.
Shorting Bar for
X, Y, or Z.